A & I Fasteners & Supply

Call Now For Assistance

(713) 946-6627

A&I Fastener mobile logo

Call Now For Assistance

(713) 946-6627

PRODUCTS > FASTENERS > ANCHORS

ANCHORS

Wedge Anchors Plated

1. Drill hole in concrete (hole diameter same as thread diameter) maximum depth of drilled hole could be any recommended depth.

2. Drive wedge anchor into drilled hole through fixtures so that nut is flush with fixture.

3. Tighten nut until wrench resistance is felt (approximately 3 to 4 full turns of the nut after snugged up) anchorage is now complete.